HeyAwesomePeople
New Member
Hey guys. I'm planning on building my first quadcopter and want to know your thoughts on the parts I want to get. Here they are:
Frame: https://hobbyking.com/en_us/a250-carbon-fibre-racing-frame.html
ESC: https://hobbyking.com/en_us/q-brain-4-x-20a-brushless-quadcopter-esc-2-4s-3a-sbec.html
CW Motors: https://hobbyking.com/en_us/ldpower-mt1806-2280kv-brushless-multicopter-motor-cw.html
CCW Motors: https://hobbyking.com/en_us/ldpower-mt1806-2280kv-brushless-multicopter-motor-ccw.html
6040 Props: https://hobbyking.com/en_us/6040-carbon-prop.html
Flight Controller: https://hobbyking.com/en_us/dji-naza-m-lite-multi-rotor-flight-controller-gps-combo.html
Battery: https://hobbyking.com/en_us/turnigy-3600mah-3s-30c-lipo-pack.html
Receiver: https://hobbyking.com/en_us/frsky-v8r7-ii-2-4ghz-7ch-receiver.html
Transmitter: https://www.amazon.com/FlySky-Chann...1482838077&sr=1-3&keywords=2.4ghz+transmitter
And of course, a battery charger: https://hobbyking.com/en_us/turnigy-accucel-6-50w-6a-balancer-charger-w-accessories.html
The total weight of the drone is around 700 grams, with a calculated thrust of 1400. The flight controller is one of the most expensive parts in this build, but from what I see it's essential for stability during flight. It also looks easier to use compared to other flight controllers that I've seen.
Is this a good setup? If there is anything wrong with this setup could you let me know what I could fix?
Thanks,
HeyAwesomePeople
Frame: https://hobbyking.com/en_us/a250-carbon-fibre-racing-frame.html
ESC: https://hobbyking.com/en_us/q-brain-4-x-20a-brushless-quadcopter-esc-2-4s-3a-sbec.html
CW Motors: https://hobbyking.com/en_us/ldpower-mt1806-2280kv-brushless-multicopter-motor-cw.html
CCW Motors: https://hobbyking.com/en_us/ldpower-mt1806-2280kv-brushless-multicopter-motor-ccw.html
6040 Props: https://hobbyking.com/en_us/6040-carbon-prop.html
Flight Controller: https://hobbyking.com/en_us/dji-naza-m-lite-multi-rotor-flight-controller-gps-combo.html
Battery: https://hobbyking.com/en_us/turnigy-3600mah-3s-30c-lipo-pack.html
Receiver: https://hobbyking.com/en_us/frsky-v8r7-ii-2-4ghz-7ch-receiver.html
Transmitter: https://www.amazon.com/FlySky-Chann...1482838077&sr=1-3&keywords=2.4ghz+transmitter
And of course, a battery charger: https://hobbyking.com/en_us/turnigy-accucel-6-50w-6a-balancer-charger-w-accessories.html
The total weight of the drone is around 700 grams, with a calculated thrust of 1400. The flight controller is one of the most expensive parts in this build, but from what I see it's essential for stability during flight. It also looks easier to use compared to other flight controllers that I've seen.
Is this a good setup? If there is anything wrong with this setup could you let me know what I could fix?
Thanks,
HeyAwesomePeople
Last edited: