Which motor for quadcopter?

[Lennard]

Hello,
I don't know which motor I have to take for my new Quadcopter. I want that my Quadcopter is relative stable (for recordings), but also response relative fast? I have a 450mm frame.
I often read that the T-Motor F40 Pro II are very good motor?

Many thanks

 

[RENOV8R]

The F40 Pro II is an excellent motor, however it's a racing motor with low profile and much too high kv rating for your purpose. For a typical 450 frame, a 2212 size motor with a 1000kv rating would give you stable flight but still be quite sporty. The Quanum MT series is a good motor at a decent price.

 

[mozquito1]

I'll go with the above aswell. With 10" props. Preferably carbon.

 

[Sean B.]

I may as well ask here too. The amount of motor types is incredible. What would be a good size and kv to start?
I’ve got a 6” freestyle frame running 4s. Would like to start out with some GoPro video

 

[mozquito1]

6 inch frame or takes 6 inch props.
If 6inch props then something beefy like a 2306. The new dys range or emax.

 

[Sean B.]

260mm 6”props

 

[mozquito1]

What are you willing to spend per set or motor. 2205-7 will work but IMO a 2306 will swing that prop better. With a 30amp esc, or 20amp with the 2205.

 

[RENOV8R]

I'm in the middle of an Aether 6" build and using the Emax RS 2306 2550kv. A little high kv but I'm planning on using 6030 2 blade props.


What would I go with if I was going starting another 6" build? These:
https://www.racedayquads.com/collec...ii-2306-2400kv-race-spec-brushless-motor-4-6s

 

[mozquito1]

Not many 6" tri blades out there IMO.

 

[RENOV8R]

There's a few. You can get the Dal Cyclone in 6", same with Gatebreakers and Racekraft TCS

 

[Sean B.]

Thanks for the help guys