Robert Dillon
New Member
Hi all. New to quads and flying them but have a little RC experience. Just bought a Storm SRD250 v3
Got a slight issue that I can't resolve with some searching. Hopefully it's not too uncommon and some kind soul will help me out.
Flowen a dozen or so times. When in horizon mode it rolls (right stick) to the left just fine and quick but is very slow and only just manages it when going to the right. Needs a lot of height.
Earlier last week it was rolling in both directions equally.
Since then it's had a few tumbles. I wouldn't say anything too harsh I'm flying over long grass and only bent a couple of props.
I've tried swapping the props and messing with battery placement and checked the transmitter settings. I have a fair amount of left trim on the transmitter.
I've read sometimes the gyro needs to be reset after a crash. Although I thought this was calibrated when plugging in the battery?
It's running cleanflight if that makes any difference.
Thanks in advance for any tips.
Rob
Got a slight issue that I can't resolve with some searching. Hopefully it's not too uncommon and some kind soul will help me out.
Flowen a dozen or so times. When in horizon mode it rolls (right stick) to the left just fine and quick but is very slow and only just manages it when going to the right. Needs a lot of height.
Earlier last week it was rolling in both directions equally.
Since then it's had a few tumbles. I wouldn't say anything too harsh I'm flying over long grass and only bent a couple of props.
I've tried swapping the props and messing with battery placement and checked the transmitter settings. I have a fair amount of left trim on the transmitter.
I've read sometimes the gyro needs to be reset after a crash. Although I thought this was calibrated when plugging in the battery?
It's running cleanflight if that makes any difference.
Thanks in advance for any tips.
Rob