Tyro 89 vtx issues

L

lauriui

New Member
Hi,
Got first build, tyro89. After small crash vtx is working, can still select channels, but no signal on my ev800d. No other pats were afected, drone can flt properly. Vtx antena seems intact, cant see antena being naked anywhere. As it is no name vtx, cant find any manual on it. It is not supported by betaflight, so cant see anything there. Any suggestions what to check next? Or just get another vtx?
 
Yah usually it's antennae that broke loose but can be hard to diagnose or find where the break is usually will spend like 20-30 min on something like that then if can't seem to resolve start to weigh the time sink trying to fix vs just buying replacement part. Can always put it in a box of might work stuff for a rainy day when feel like debugging or testing things more thoroughly. I setup a test rig for motors and esc to make it pretty easy to drop a pair of them in and use a servo tester to send pwm signals to the escs directly.
 
wafflejock said:
Yah usually it's antennae that broke loose but can be hard to diagnose or find where the break is usually will spend like 20-30 min on something like that then if can't seem to resolve start to weigh the time sink trying to fix vs just buying replacement part. Can always put it in a box of might work stuff for a rainy day when feel like debugging or testing things more thoroughly. I setup a test rig for motors and esc to make it pretty easy to drop a pair of them in and use a servo tester to send pwm signals to the escs directly.
Click to expand...
Probably going to buy new vtx, since even at close range it doesnt catch anything. Guess į might also change few more things. Like hd camera with onboard recording. And thinking about different frame, to have battery top mounted, but really not sure about that as i have bought parts together with a drone, so i have another identical frame :) but to upgrade camera ill have to get bigger screwa
Maybe keep frame upgrade for a bit later, maybe for a new drone
 
Back
Top