Tinyhawk2 and tx16s

J

Johnweim

Member
Just signed up and have a question already. Trying to setup tinyhawk with tx16s and it binds ok,but the controls are messed up, throttle is on stick where roll should be, yaw is ok, elev and aileron mixed on sticks. Have skfly 8 set, any idea why? I can try to set the channels to correct, but would like to figure out why it's like this . Thanks for your help.
 
On your radio setup page the default channel order should be AETR, and in mode 2 for left stick throttle.
In the betaflight configurator, the receiver tab should also show AETR in the upper right.
Most likely it's in the radio setup.
 
Badfish said:
On your radio setup page the default channel order should be AETR, and in mode 2 for left stick throttle.
In the betaflight configurator, the receiver tab should also show AETR in the upper right.
Most likely it's in the radio setup.
Click to expand...
Thanks for your help, I must have missed the mode setting. I got it to work by switching the channels around, albeit not the normal order. Still learning. Thanks again
 
You must log in or register to reply here.
Back
Top