Tinyhawk 2 shaky then loses focus

_adjm_

New Member
The camera was out of focus after a crash. I’ve taken out the side screws, popped the camera out and adjusted the focus so the camerais clear again.

However after I take off, the picture is shaky and within a few seconds then camera is out of focus again.

Any idea what could be causing this? The quad has taken a bit of a battering! But I’d like to pinpoint what needs replacing is possible!

Thanks in advance
 
This video on tightening down the locking ring on lens might be helpful:

Otherwise check the housing again. I kept losing focus on my caddx rattel1 after a bad crash, and noticed a small crack in the paint. Later realized under the paint the whole front housing cracked, and the camera came apart in my hands after taking it out.

Hope it helps!
 
Good advice above just adding if the ring is missing or not holding it in focus some bluetac reusable putty stuff would work and is just handy to have.
 
Back
Top