Hello, I have a QAV-R with LUX FC and a DX6i transmitter/spektrum satellite receiver.
On Cleanflight I calibrated my ESCs with a throttle max at 1850 (and min at 1030) because my DX6i seems to only give a signal from 1020 to 1900 in the receiver tab (with +125% expo).
However eveybody seems to have a throttle max at 2000 so I don't know if by calibrating my ESC with a throttle max at 1850 I make my motor running at full speed at 1850 or if they never reach their full speed.
So are my settings OK with that throttle max or do I need to find a way to have a signal from 1000 to 2000 (which seems impossible with the transmitter settings especially as my expo is already at 125%).
Thanks for your help!
On Cleanflight I calibrated my ESCs with a throttle max at 1850 (and min at 1030) because my DX6i seems to only give a signal from 1020 to 1900 in the receiver tab (with +125% expo).
However eveybody seems to have a throttle max at 2000 so I don't know if by calibrating my ESC with a throttle max at 1850 I make my motor running at full speed at 1850 or if they never reach their full speed.
So are my settings OK with that throttle max or do I need to find a way to have a signal from 1000 to 2000 (which seems impossible with the transmitter settings especially as my expo is already at 125%).
Thanks for your help!