Super H Motor Layout

[Henderson101]

Im building a quad-copter and having some issues with the Control Board motor layout. Im using a KK2.0 HC and its on the Hobby king Super H 600 frame. I tried a preset X layout on the board however me being the tool i am didn't realise until after trying to fly it that the props were not set out in an X shape but a H shape. Basically what im asking is how on earth do i get a H layout onto my control board or how i configure one, thanks in advance for the help.

 

[holtneil]

Hi mate it should fly as an X quad if you measure the motors centre to centre they should be the same , it was the dead cat frame that had problems
The KK needs to be mounted in the middle of the legs section of the frame with the arrow forward it need to be the same distance from front and back legs the motor lay out will be the X quad so front left spins cw front right ccw back left ccw back right cw
if your running the hobby king firmware get the flash tool and flash with steveis1.8s1pro this is very stable