Quadcopter not changing to armed mode

[sidaqdeep1]

1. Hi, I'm a newbie and am making my first quad. I did everything right (I think) and made it to start. The first problem I came across was that I was unable to change it to armed mode. I have a Hobbyking KK 2.1.5 lcd board. All the sensors are OK and it says OK on startup screen. I even calibrated the throttle, ACC, and checked the reciever inputs, but no matter what I do, it won't change to armed mode. The usual turning the yaw to right at 0 throttle changes nothing. But if I do that, the board beeps on 1 sec intervals. On throttle calibration, all motors were rotating in the right directions, and I did load the x copter layout. Please help..

 

[holtneil]

Hi mate to arm it needs zero throttle and full right rudder , make sure in the monitor screen on set up you have throttle and rudder working the right way and at 100% throw