Prop Adapters

H

HDtallrider

Well-Known Member
Hi again. I'm having trouble finding prop adapters to fit some Gartt ( I know, I know. Mediocre ) ML 2212 motors I got by accident. They have a shaft that is 15mm long. There is a 4mm thread that is 6mm long. the rest of the shaft is 6mm in diameter with 2 flat relief's cut into it 180 from each other. There are 2 CW and 2 CCW motors. I have been unable to find adapters online. I know they must make them I just don't know where to look. Anyone have any knowledge on this? I have found a lot of adapters, but none that look like they will work for these motors.
 
Hey holtneil. I'm sure the collett type won't work. The grub type might work if I could find the right size. I'm thinking that there is a thread on adapter out there that would be perfect. These motors are another example of the mistakes a newbie makes. My errors have turned this into an expensive hobby!:p I contacted the manufacturer this morning to see if they could help. If they bomb out I will either give these away or make a video of me doing them in with a hammer..............LOL
 
Have you got a link for the motors , once I see them I may work out some thing , I have a mate in the USA that makes Helicopter parts with a CNC alloy, he loves making things so if all else fails I will put you in touch with him , He is good well better than good , his last knock up job was a complete 450 class CP heli totally hand made from CNC parts he even made a gear box that sat on top or the motor with sun and planet gears to up the head speed amazing guy
 
Sorry for the delay. My computer glitched for a couple days. I discovered that these motors are purpose built to replace the DJI motors. They accept any of the DJI self locking propellers. That's fine. Those props are readily available. Since I was planning to use them on experimental builds anyway that will be ok. Thanks for jumping in to help but I think I'll just use them as they are. :)
 
Back
Top