I am interested in building one X180 quad.
I have concluded on size (x180) and frame models (tweaker FPV or Goby-180) and Flight controller as well (Dodo rev 3a).
I would really like your help on selecting compatible parts such as motors, props, batteries, ESCs
ESC= LittleBee 20A ESC (BLHeli)?
Motors= EMAX RS2205 2600KV not concluded on this yet, but something 3S-4S compatible
Props = something to go with the relative motors/battery but would like some set of 2-blade props and some set of 3-blade props.
PDB: like "Afro Power Board" or a similar one (since dodo FC has an embedded regulator)
Batteries: 45C-75C 3S & 4S (1000-1300mAh)
I will really appreciate any help, since I'm stack for a long time now!
Due to the fact I am a beginner and all the above have come to me from forum/internet reading, I would really like to hear your expert opinion on the above selected parts.
p.s.
I already have already built a micro FPV 5.8G system, waiting to be used…
I have concluded on size (x180) and frame models (tweaker FPV or Goby-180) and Flight controller as well (Dodo rev 3a).
I would really like your help on selecting compatible parts such as motors, props, batteries, ESCs
ESC= LittleBee 20A ESC (BLHeli)?
Motors= EMAX RS2205 2600KV not concluded on this yet, but something 3S-4S compatible
Props = something to go with the relative motors/battery but would like some set of 2-blade props and some set of 3-blade props.
PDB: like "Afro Power Board" or a similar one (since dodo FC has an embedded regulator)
Batteries: 45C-75C 3S & 4S (1000-1300mAh)
I will really appreciate any help, since I'm stack for a long time now!
Due to the fact I am a beginner and all the above have come to me from forum/internet reading, I would really like to hear your expert opinion on the above selected parts.
p.s.
I already have already built a micro FPV 5.8G system, waiting to be used…