Need help repairing power switch on CX-10

N

nathanoJ yelnatS

super original dude... #678
Hey guys,
I just got my first Cheerson CX-10, and seeing as this is my first RTF quad copter I am having a bit of a problem doing repairs on it due to its lack of removable parts and such. To be more specific, I am one of nine brothers of sisters and all I know is that one of them decided to mess with my "tiny little flying thing" when I wasn't around and somehow or another managed to loose the delicate little power switch that was already barely held in place. So now I am asking y'all,
What should I do?
Should I try to find a new power switch?(and if so then where)
Or should I try to build my own?(and if so then how the heck)
Or of course if y'all have any other solutions I would really appreciate the help.
Thanks
 
Hi mate if they broke the switch being heavy handed , the switch may have been pushed in side the quad , take the case apart and push switch back out and use some hot glue to hold it there
 
if the battery has a plug and is easy to get to i would just join the wires from the switch and not have a switch
 
I still can't figure out any way to straight wire the power to get it working. the switch is directly soldered to the circut board and so are the power wires. therefore i can't find any conection to re-wire.
 
look at under side a circuit board use solder to link across the back of the switch points be careful not to short the pos and neg you could solder a short bit if wire if you dont want to use just solder
 
Hi mate this is why i ask if you can get to the battery just unplug it when not in use
Have you get a shop called maplins they do switches you may be able to get some thing from them
 
Back
Top