Motor overheating. Newbie post

J

JeffT

New Member
Hi, I have a QAV250 quad. It flies great, but when I connect the FPV transmitter, rotor 1 plays up and gets hot. FC, TX and camera powered from a regulator board and nothing is powered from an ESC. I have tried 2 Tx's and 2 FC's, and it's always rotor 1. Any ideas would be appreciated. Thanks.
 
Hi try and move the FPV transmitter away from its location its in and see if it still does it , if not then its a interference problem
 
Back
Top