Hello Quadcopterforum,
I have had plenty of experience with RCs, but none with betaflight and blheli. After several hours of work, the board is paired and arms with the remote, but I have an esc issue - when testing the motors, the board puts out voltage when I move the throttle up and down in Betaflight, but if I leave it steady it flat lines.
My current setup:
Dshot300
BTFL 3.5.0 (CBFS)
Configurator 10.4.1
O-L-5 ESC
Programming by TX
Default ESC
I have tried just about everything, read through plenty of tutorials and manuals, but am completely lost. Any advice is greatly appreciated.
I have had plenty of experience with RCs, but none with betaflight and blheli. After several hours of work, the board is paired and arms with the remote, but I have an esc issue - when testing the motors, the board puts out voltage when I move the throttle up and down in Betaflight, but if I leave it steady it flat lines.
My current setup:
Dshot300
BTFL 3.5.0 (CBFS)
Configurator 10.4.1
O-L-5 ESC
Programming by TX
Default ESC
I have tried just about everything, read through plenty of tutorials and manuals, but am completely lost. Any advice is greatly appreciated.