I need your opinion

D

Donovan Silver

New Member
I am looking into building a quad copter and I have put together a list of parts. I believe everything here would work but I would like to ask some people more experienced than me about it. I will be adding a gimble and a gopro or similar camera on it as well but I have not chosen those. For the needs I have, would this flight controller be good, is there a better flight controller I could use? If you could point out any other issues or suggestions that would be great I am trying to learn as much as I can before I build. Also if you guys have an suggestions on how to make cut some price off it that would be great, I am open to upgrading it in the future so I don't need top of the line things right off the bat.



Any help is appreciated, Thanks.

Frame
http://www.hobbyking.com/hobbyking/..._Pro_Carbon_Fiber_Folding_Quadcopter_Kit.html

Motors
http://www.hobbyking.com/hobbyking/..._Brushless_Multirotor_Motor_Built_by_DYS.html
ESC
http://www.hobbyking.com/hobbyking/...ar_30A_Slim_V2_ESC_With_BLHeli_OPTO_2_6S.html
Battery
http://www.hobbyking.com/hobbyking/...apacity_5200Mah_4S_Multi_Rotor_Lipo_Pack.html
Flight controller
http://www.hobbyking.com/hobbyking/...ht_Controller_w_Integrated_433Mhz_OPLink.html
Props
http://www.hobbyking.com/hobbyking/store/__84404__APC_Style_Propeller_14x5_5_Grey_CW_CCW_2pcs_.html
 
Everything looks good to me except the motor. You may want a little higher kv on a 4s setup. I would run those motors on a 6s setup.

Hover is 85% with the one you picked. This is with the 580kv.

Screen Shot 2016-01-25 at 8.26.02 PM.png
 
I would go 6s for sure as it would be the most efficient, but you have to consider charging all of those cells.

You can get a gimbal that works independently so no need to worry about your flight controller being compatible.

Numbers with 6s.

Screen Shot 2016-01-25 at 9.12.38 PM.png


I just realized that was with a 3s here it is with a 4s.
Screen Shot 2016-01-25 at 9.16.29 PM.png
 
Back
Top