Hubsan X4 questions

[nopeda]

I've recently damaged a Hubsan X4 by hitting a cable with it and it fell hard about 30' onto an asphalt parking lot. It landed upside down and the blades were turning wide open, so I had to disconnect the power wires to shut it down. After that when the power wires are connected the blue LEDs blink alternating left and right, then when the transmitter is turned on they blink together. The transmitter LED turns green saying they are communicating, but the copter won't respond and the blue LEDs keep blinking. Can anyone tell me if there's a way to fix whatever is wrong?

Also, I don't have whatever it takes to make the camera work. There's a slot to insert something but I don't have it, and if it came in the package I accidentally threw it away without ever seeing it. Can anyone tell me what to get in order to get the camera working, and also if there are any tricks I need to know about?

Thank you for any help!
David

 

[Hugh Hemington]

The slot would be for a micro-SD memory card. A cheap one would be 4GB, but try to get it in "Class 10" so it accepts data fast enough. You might be looking at just buying another Hubsan and using this one for parts after that crash though.

 

[heath]

I flew mine into a power line and it did the same thing. I left it unplugged for about 10 minutes and it started working normally again.

If you did fry the board, you can get a replacement for about $20. I think the H107C uses the same board as the H107L which is what I have. With basic soldering skills, it's not that hard to replace.