How do I choose/find the right Flight Control Board for this kit

Most flight control boards should work with just about all multirotors. In fact, most control boards will work with multiple frame configurations and even different numbers of rotors. Some even support planes in addition to helicopters and multirotors. It's all in the software. The KK board is very well developed, so it should support what you're doing with no problem. Other boards that are well developed are DJI Naza and the OpenPilot boards, but they're more expensive. ESC's and brushless motors are pretty standard in the way they work, so you should be good.
 
It's been a while, but I've been busy crashing flying my quads. The Dyanm 650 came ARF and needed a receiver and battery as well as a KK2 FCB. the way the power distribution board was oriented and the ESC were foam taped to the center had it in + mode. I cut a gopro mount down to save weight and bolted it to the bottom of the center frame piece. Made a few videos. https://www.youtube.com/user/Chrysolithos1/videos
Set the P gain to 130 and left the rest alone.1stSetup-+Config.jpg1stSetupLayout..jpg
 
Back
Top