FrSky XSRF3E setup problems

P

pat bunn

Member
I have the board and PDP board installed with the ESC wired. The receiver section binds properly. Telemetry is working but when I go to the receiver section of the Betaflite Configerator - I get nothing. The transmitter stick and switches are not being received. I have double checked the port setting and they are correct.

Ay ideas what may be going on. Thanks in advance.
 
You have the ports tab set correctly, but do you have sBus selected in the configuration tab? Also, what transmitter are you using?
 
Messed with it some more today. Telementry is working fine but no receiver input show up on the receiver screen. I am beginning to think it is a board problem. I may toss it and do it with a separate XSR and F3 board.
 
Back
Top