FPV finishing touches need help: Phantom 1 - GoPro3 - Fatshark

[bbigelow]

Hello pilots,

So I'm almost there adding FPV to my Phantom 1 and GoPro 3+. Ordered a kit from ReadymadeRC, and I'm still missing a few parts, but I'm unsure what to get. I would be extremely grateful for some advice!

What I ordered:
**RMRC Custom FPV Package - 5.8GHz (RMRC-CUSTOM-58GHZ)
-Camera GoPro HERO3 & HERO4 Cable
-Video Transmitter FatShark 250mW 5.8GHz
-Video Receiver Fat Shark Dominator 5.8GHz Receiver Module, Standard Bands
-TX Antenna Circular Wireless - 5.8 GHz SPW58RCHP Skew Planar Wheel (1PC)
-RX Antenna Standard
-ReadyMadeRC 7 Inch LCD FPV Monitor

Attached are photos of the Transmitter, Receiver, Monitor, and cables supplied.

So what I'm still lacking and need help with:

1) How do I power the transmitter? What battery should I buy, and can I charge it with the Phantom charger? Do I need adapters to charge it?

2) Same question but with the receiver and monitor. What batteries and how do I charge them?

3) How does the video connect from the receiver to the monitor?

4) Where do you recommend I mount the antenna?

Thank you so much!

Photos of gear in question below with links to product pages:

Monitor (http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=1402)

Receiver (http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=165_107&products_id=524)

Transmitter (http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_30_33&products_id=485)

Phantom charger:

 

[Patton]

Great post. Wish I had the answers. I do know that charger is the one that comes with the Phantom 1. At least it is the one that came with mine.
I have a 1.1.1

Haven't yet decided if I want to do FPV with it because I'll probably buy a P3P if and when they iron out the bugs.

Have you checked over at DJI Forums?

Did you see these?

https://www.youtube.com/watch?t=82&v=2JP1IYFfHp4

 

[bbigelow]

Thanks man, that video is perfect regarding the transmitter part. Now I have to figure out the receiver part. Getting some help over here too: http://www.phantompilots.com/threads/problems-with-fpv-setup.48196/

 

[Patton]

Here's another that might help....
http://www.sarawuth.com/2014/01/dji-phantom-1-modify-to-have-can-bus-port/