Flight controller problems

conor

conor

New Member
I purchased a kkmulticopter v5.5 and I have just put my frame together (Turnigy Talon).
I watched videos online that the arrow points to the front face of the quadcopter.
Now this is a + system.
This will interfere with my camera as I will see the landing gear and thats no fun..
Is there a way to configure the flight controller to change it to an X system rather than the +.

Any help will be appreciated,
 
Hi mate Yes it can in the set up also each has 2 flight mode normal or acro here is a link to the manual your need the flash tool I think to set it up , I did check you need to flash the chip on the board with the quad x set up so you do need the flash tool and this software
https://www.google.co.uk/url?sa=t&r...Q3do4Obe-XKzy_-vw&sig2=60G8jSM0s59i_dQh4vIGkQ
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CC8QFjAC&url=http://www.robotshop.com/media/files/pdf/user-manual-kk-control-package.pdf&ei=WojwVIKrG4zKaJ3_gagO&usg=AFQjCNEGZaHolJ3jYmppPAl4fa7s6Zj9aQ&sig2=SmM4D-U7DT4fPLeSVMqgZA
 
Back
Top