First quadcopter choosing sunnisky motors!

andrea

andrea

Member
Hello,
This is my first build i spent a lot of time in search of the better parts for my quadcopter.
My goal would be to transport my camera (300 g ) with a reasonable flight time
(using lower KV motors).

Here is my list:
  • Transmitter and receiver : Turnigy 9X 9Ch Transmitter 30g approx (48€) link
  • Frame (very strong) : Homemade x config. 550mm 200g approx
  • Flight controller : Hobbyking KK2.0 multiWii 30g (50€) link
  • ESCs: 4x Afro ESC 30Amp (45€) x4= 104g Link
  • Motors : 4x Sunnysky X2212 980KV (54€) x4= 224g Link
Or: 4x SunnySky V2216-12 KV800 II
I would prefer a lower KV (600-900 KV )

  • Battery : 3 or 4 s probably 4 s ( based on the motor choiche).
  • Props : 10x4.5 SF Props 2pc CW 2 pc CCW 10g approx. . (€3) link
    The props may change based on the motor choice ( using e-calc.)
My questions are two:

This configuration may be able to fly and carry my camera for a reasonable period of time?

What motors are better for my project ?
 
Last edited:
HI mate welcome on that set up i would go for agm or emax pan motors at 650kv and 14x5.5 props , they get so much lift , sunny sky are great are you sure they dont have a 650kv if not T motors do a 650KV
You can run 3 cell but go for 4000mah or 5200mah
 
The sunnysky have a V2216-13 650KV so i so I decided to buy these motors... And i think to buy a 12x4.5 and a 14x5.5 props.
With this configuration you think i should proceed with my order?
 
Ok but i don't think the quality is the same...After reading a lots of comments about motors... i see that the sunnysky would be a good choice...Just because i don't want spend more money after to buy a superior quality motors.
 
Hi mate the motors in that link work well till you crash them, shafts bend and motor will shake quad to death after , go with sunnysky you will not regret it
 
Back
Top