First Build - Recommendations Needed!

G

GoProDavidLe

Well-Known Member
Hello everyone,

I am new to the RC scene and I'm looking to build my first quadcopter. I have been looking into my first build for a couple months now and have done a little research. But of course, I am here to find some more knowledgable recommendation and information.

Purpose: My purpose of having a quadcopter is to be able to mount my GoPro 3+ or 4 and have great stability for videos/photos. Decent or long battery life would be beneficial.

- Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame - 550MM - 280 Grams
http://www.hobbyking.com/hobbyking/...0_Carbon_Fiber_Frame_550mm_AR_Warehouse_.html

- (4) NTM Prop Drive Series 28-26A 1200KV / 286 W (short shaft version) - 80 Grams (each)
http://www.hobbyking.com/hobbyking/store/__17345__NTM_Prop_Drive_Series_28_26A_1200kv_286w.html

- Zippy Flightmax 2800 mAh 3SIP 30C - 261 Grams
http://www.hobbyking.com/hobbyking/...Flightmax_2200mAh_3S1P_20C_AR_Warehouse_.html

- (4) NTM 28 Carbon Fiber Motor Mount - 15 Grams (each)
http://www.hobbyking.com/hobbyking/store/__70558__NTM_42_Carbon_Fibre_Motor_Mount_AR_Warehouse_.html

- (4) Turnigy Multistar 30 Amp Multi Rotor Brushless ESC - 34 Grams (each)
http://www.hobbyking.com/hobbyking/...i_rotor_Brushless_ESC_2_4S_AR_Warehouse_.html

- Hobby King KK 2.1.5 Multi Rotor LCD Flight Control Board with 6050MPU and Atmel 644PA
http://www.hobbyking.com/hobbyking/...th_6050MPU_And_Atmel_644PA_AR_Warehouse_.html

- Turnigy Multistar Programming Card
http://www.hobbyking.com/hobbyking/...istar_ESC_Programming_Card_AR_Warehouse_.html

Like I mentioned, I am VERY NEW to building and I am still in the learning process. If anyone can suggest different products that will make this build better for the price, please post.

What
 
I got the talon v2 and had little intention of puting the gopro on it, but now that i want to, i will have to build a mount as there is no where to mount it.
 
Hi plushtalon ,tell me about it thats what i have but its now at 700mm, i used a plate from the x525 to give me some where to mount the PDB and receiver

IMG_1020 - Copy.JPG
 
Hi mate if it was me i would buy a carbon fibre sheet and long legs , use the sheet to make a bigger bottom then mount legs to this and camera .
Now also on E bay there is a seller that sells legs that have a gimbal mount mounted already and also has mounts for extra batteries
 
First version of my rotor. Talon v2 with plates from two kits to make a "tower" for my electronics. Multistar 40a esc, multistar 4010-580kv brushless with 15x7.5 prop, naza lite flight controller, 4s 10000mah battery. Average flight time in attitude/GPS mode (best for video) about 40min.
WqeHf50.jpg


These will give you the extra room for a gopro gimble.
http://www.rcgroups.com/forums/showthread.php?t=1792034
 
Last edited:
Tase said:
First version of my rotor. Talon v2 with plates from two kits to make a "tower" for my electronics. Multistar 40a esc, multistar 4010-580kv brushless with 15x7 prop, naza lite flight controller, 4s 10000mah battery. Average flight time in attitude/GPS mode (best for video) about 40min.
WqeHf50.jpg


These will give you the extra room for a gopro gimble.
http://www.rcgroups.com/forums/showthread.php?t=1792034
Click to expand...

Off topic but where did you get those blades? And do they come in 5 inch?
 
Back
Top