First build questions

J

John Li

New Member
price(without gopro): 379$ weight: 1231.3g

http://hobbyking.com/hobbyking/stor...Quadcopter_V2_0_Carbon_Fiber_Frame_550mm.html frame 55$ 280g


http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=39708&aff=224284 esc 30a 56$ 106g


http://www.amazon.com/Turnigy-5000m...d=1445727459&sr=1-1&keywords=3s+lipo+20c+5000 battery 5000mah 34$ 412g


http://www.amazon.com/GoPro-CHDHN-3...e=UTF8&qid=1445722614&sr=1-1&keywords=gopro+3 camera 277$ 136g



http://www.amazon.com/Andoer-Flight-Controller-Multicopter-Quadcopter/dp/B00Q496EOM flight controller 43$


http://www.hobbyking.com/hobbyking/..._Brushless_Multirotor_Motor_Built_by_DYS.html motor 80$ 240g


http://www.hobbyking.com/hobbyking/...iber_Propeller_11x4_7_Black_CW_CCW_2pcs_.html prop 18$ 30g


http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8992&aff=224284 transmitter and receiver 60$


http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=28255 power distribution 5$ 27.3g


http://www.hobbyking.com/hobbyking/...cone_Wire_16AWG_1mtr_Red.html?strSearch=16awg wire 2$


http://www.amazon.com/Leegoal-3-5mm..._UL160_SR160,160_&refRID=04K0SJ9S4RJK09GSVHBZ bullet connector 3$


http://www.hobbyking.com/hobbyking/...e_to_Male_Servo_Lead_JR_26AWG_10pcs_set_.html servo lead 2$


http://www.hobbyking.com/hobbycity/store/uh_viewitem.asp?idproduct=7028 battery charger 23$


http://www.amazon.com/Andoer-Precis..._21_img_2?ie=UTF8&refRID=1MA6NAFM2X39A7VX4H9Q gps 23$

will this have adequate thrust? and how do you calculate the thrust? also what components do i need to make it FPV later
 
I'd suggest these ESCs, they will run 2s - 6s and your motors will do 3s - 5s and that you get a battery with an XT60 connector. Your motors will do bigger props if you would wish them to. Overall though I'd say you have an excellent build.
 
Last edited:
Also if you are interested in adding FPV (fly a little LOS first) check this out.
Also you are probably going to want to get a toy grade like a Husban or Syma to fly before you put a few hundred dollars in the air.
 
GJH105775 said:
I'd suggest these ESCs, they will run 2s - 6s and your motors will do 3s - 5s and that you get a battery with an XT60 connector. Your motors will do bigger props if you would wish them to. Overall though I'd say you have an excellent build.
Click to expand...
how long do you think the flight time will be
 
John Li said:
also what is the thrust of my quadcopter
Click to expand...
Put your parts (or the closest you can find) into the calculator, and then play around with it a little. It will teach you a lot on how different parts affect the build. NOTE: You may have to tweak the weight to not include drive and a few other things.
 
You must log in or register to reply here.
Back
Top