eXangelR
Member
Hi guys,
I am trying to get parta together for my first drone build. I am thinking that I have almost everything ready but FC and Rx.
I bought Frsky Taranis X9D+ and prepare to buy frsky Rx. I am thinking about r-xsr or rx6r (better range?). I read about compatibility issues between frsky Rxs and FC with F1 and F4 cpus. But I read also some articles about flashing frsky Rxs with their software and probably after that they can work with F4s FC.
I am pretty unsure what to for FC should I buy. I do not want to pay for expensive FC and I am looking for something under 50€.
Which FC should I buy? F3 and be safe with compatibility but have cleanflight or F7 much expensive but be safe and betaflight or should I buy F4 and try to flash frsky Rxs? Will be F3 acro good for me as a beginner thinking about pins for escs, spare uarts and other ports? For that price unbeatable.
I plan to run FPV later, but first without it, I have:
- 20A esc Cyclone 4pcs
- motors MT2204 2300kv readytosky
- frame mark4
- battery lipo cnhl 3S 2000mah 100C
- props 5045
- matek systems pdb-xt60 w/ or matek mini power hub
- mini tracker buzzer
- gps Beitian BN880
These are my options:
1
2
3
4
Please help me cause I do not have experience with this yet.
Thank you for any advice.
I am trying to get parta together for my first drone build. I am thinking that I have almost everything ready but FC and Rx.
I bought Frsky Taranis X9D+ and prepare to buy frsky Rx. I am thinking about r-xsr or rx6r (better range?). I read about compatibility issues between frsky Rxs and FC with F1 and F4 cpus. But I read also some articles about flashing frsky Rxs with their software and probably after that they can work with F4s FC.
I am pretty unsure what to for FC should I buy. I do not want to pay for expensive FC and I am looking for something under 50€.
Which FC should I buy? F3 and be safe with compatibility but have cleanflight or F7 much expensive but be safe and betaflight or should I buy F4 and try to flash frsky Rxs? Will be F3 acro good for me as a beginner thinking about pins for escs, spare uarts and other ports? For that price unbeatable.
I plan to run FPV later, but first without it, I have:
- 20A esc Cyclone 4pcs
- motors MT2204 2300kv readytosky
- frame mark4
- battery lipo cnhl 3S 2000mah 100C
- props 5045
- matek systems pdb-xt60 w/ or matek mini power hub
- mini tracker buzzer
- gps Beitian BN880
These are my options:
1
2
3
4
Please help me cause I do not have experience with this yet.
Thank you for any advice.