DIY a quadcopter, power supply problem discussion

Diven

Diven

Well-Known Member
Now I am DIY a quadcopter, all the programs are completed, I began to design the hardware, but the power supply has encountered some problems.

I used a 2200mah 3s lipo battery , and now the main chip power supply is 11.1V. I want to ask do you have any good way of buck power supply? Can I use the XC6206 chip?

What’s the method of your power supply?
 
Depends on your setup. Some flight controllers have built in regulators. Or you can use a power distribution board with 5 V and 12V regulators. Or you can use ESCs with 5V BECs. Or you could as mall dropdown pololu
 
Back
Top