mozquito1
Well-Known Member
I just bought a new hs1177. I went out to try it. But the picture is all washed out, too bright.
I swapped the connectors on the in-line joystick osd & hooked it upto my TV but no picture. So then I tried it the other way where you splice the white osd onto the yellow video signal wire and then splice ground to the ground in between vtx & cam. I get picture on my goggles but no menu when press joystick. So basically spliced the 2 wires in between vtx & cam with a male/female jst for connecting. Or have I got this wrong. The first way should have worked. I powered it with a charged 2 cell lipo then a modified USB cable with a servo connector on it. But to no avail. I understand that the 2nd way needs no power just ground & the osd wire. Any pointers please, I shall be googling in the meantime.
I swapped the connectors on the in-line joystick osd & hooked it upto my TV but no picture. So then I tried it the other way where you splice the white osd onto the yellow video signal wire and then splice ground to the ground in between vtx & cam. I get picture on my goggles but no menu when press joystick. So basically spliced the 2 wires in between vtx & cam with a male/female jst for connecting. Or have I got this wrong. The first way should have worked. I powered it with a charged 2 cell lipo then a modified USB cable with a servo connector on it. But to no avail. I understand that the 2nd way needs no power just ground & the osd wire. Any pointers please, I shall be googling in the meantime.