vtx

  1. rafareusch

    Can't get SmartAudio to work

    Hey, I'm having trouble setting the SmartAudio up FC is a Succex E F4 v2.1 VTX is a AKK Infinite DVR I connected SmartAudio port labeled TBS in vtx to T1, configured uart1 at ports tab as TBS SmartAudio. Yes, I connected a lipo, imported vtx tables from akk (for some reason I can't set up the...
  2. GiantAntCowboy

    How to: Adjust VTX output power while flying.

    Just sharing this video showing “how to” setup a transmitter switch to control your VTX output power while flying. I’ve been using this feature since the summer and find it really useful when flying FPV and also when testing and tuning drones. Feel free to ask questions, if I don’t respond...
  3. Y

    Can you fly with more than 25mw of output power LEGALLY in Europe?

    Hello, this is a question I asked myself for a long time because I heard from others that you can't fly on more than 25mw of video output power outside of the US, is that true? I'm new to the hobby, so the question might seem dumb, but still, answer please even if you find it obvious, because I...
  4. J

    VTX antenna

    I am currently flying a new babyhawk r pro, amd I forgot to secure the antenna and while I was flying it started hitting the props, damaging it slightly. It sends a mich waker signal and breaks up much easier than before. I am new to the hobby and dont know how to replace it and if I should get...
  5. AndreasS

    Possible to test camera and vTX without FPV goggles?

    Hi, I'm in the final stages of building my first drone. Is it possible to test the camera and VTX without the FPV goggles? I simply haven't bought them yet. I see people use different LCD screens... but I'm not sure how to hook up that. Thanks for the advice!
  6. IsaacS

    Need help with PDB and where to solder!!!

    Hey all, I have a Matek Systems PDB (Found Here), and I also own an Eachine FPV camera (Found Here) and an Eachine VTX (Found Here). The PDB has a 5V, 12V, and two Ground pads. What do I connect and where? Thanks in advance.
  7. IsaacS

    Need help with FPV system!!!

    Hi, my drone's VTX is a TS832, and I also have an RC832 Reciever. I have Quanum v2 DIY goggles, and everything is wired correctly (camera and VTX are directly soldered to PDB). When I turn everything on, the goggles just display static and say "NO SIGNAL." I've been through all 40...
  8. mozquito1

    Voltage problem

    So my problem is I just bought a GEP vtx..... One of these Which runs 7-24v This is for a micro 130 I also bought this Along with an BF omnibus f3+osd. The vtx on my other 130 is 5v. My problem is I need a step up from 5v to 7v+. So if I buy a regulator with adjustable voltage.. Where...
  9. IsaacS

    Quad Won't connect to Goggles!!!

    Hi, my drone's VTX is a TS832, and I also have an RC832 Reciever. I have Quanum v2 DIY goggles, and everything is wired correctly (camera and VTX are directly soldered to PDB). When I turn everything on, the goggles just display static and say "NO SIGNAL." I've been through all 40...
  10. P

    What to look for when buying antennas RHCP vs LHCP pagoda and panel

    Need some clarification as to the difference between RHCP and LHCP Currently, on my VTX I have an RHCP pagoda antenna. On my goggles (eachine ev800D) I have the default antennas - attached is an image: A) On the left of the goggles, there is a "sting pad" which is like a panel antenna B) On...
  11. P

    Beginner FPV parts and compatibility?

    Hi All, I am slowly completing my quad and have come to the point where I am scouting an FPV system, but having a little trouble understanding part compatibility As a beginner, I am not wanting to spend too much, but still want a lot of good features with the potential to upgrade later. In...
  12. R

    Falcon 250 VTX swap for eachine TX526

    Hi. My first post here. I have a Eachine Falcon 250 with a broken vtx. I bought the tx526 from banggood as im allowed to use Max 25mw in my country. The new vtx has 5 cables in one connector whilst the old one had 6 cables over two connectors. Im stuck at how to connect the thing and the cc3d...
  13. Gabriel

    TS351 VTx Not Powering on

    Hi. I just received a ts351 VTx to replace my old VTx. Sadly, it won't power on... It's got ~10v from my cc3d board, but the led won't turn on, and it won't transmit.... Is this a known issue, or is mine just defective? I haven't seen anyone with this issue on other forums, but wanted to make...
Top