Search results

Hello, thanks for the reply. I did not use the same ESCs on my previous setup. But I had another quad(a ZMR250) which also has simonk ESCs (12a) and I ran into the same problem, and I had used the same setup before which worked perfectly. The only difference is time. Which begs the question...

Hello everyone! I recently built a F450 with the following specifications: 1. A2212 - 1000KV BLDC Brushless Motor. 2. Mystery Cloud 30A BLDC ESC - Brushless Motor Speed Controller. 3. Naze32 REV6 flight controller with dRonin. 4. 3300mah 3s LiPo battery I used dRonin because its easy to...

Go Here: https://github.com/fedorcomander/kissfc-chrome-gui/releases Download the software that fits your OS. You are trying to install Betaflight on a Kiss FC board so it won't work. After you download it, it will connect to your board. Then install the firmware. Then Wire the things up...

Done.

It has an IBUS option but the fault is the potentiometers on an FS-i6 are not in proper sync regarding the minimum and maximum values for all the different channels so you have to go through a lot of trouble to set that up properly (i had to anyway). I know about OpenPilot and LibrePilot but I...

Coming from an FS-i6 user BetaFlight and FS-i6 is a really bad combination (so is CleanFlight) I would suggest using any of the OpenPilot based firmware with FS-i6. (At least until you get a total idea of what you are doing)

I would recommend you build one. It's cheap. It's more interesting. And if you are really interested then you will want to know how it works(what better way to do that than making it work yourself). Buy some components and build an F450 (It's easy to build compared to race quads). Have Fun.

Actually, there is no relation between C-rating and flight time(until you are overloading your UAV) and I assumed you will be 2 * 3000mAh batteries then it will be perfect to have two 15c batteries.

I tried doing that. But its a really messed up situation. It still gives the same error. And I am not sure if it gets into DFU mode because the green light is always solid. And blue is not starting at all.

I wouldn't recommend the same motors because they have very high KV rating (more KV implies more vibration), plus you can use larger props if you use a 700KV motor. You will need a GPS (it helps in a stable flight, especially in a photography drone) you can add it on Seppuku and PX4 both but I...

If you are going for aerial photography I would recommend a hexacopter. But if you insist on a quadcopter then use an F450 frame(or any other which resembles an 'X', They are more stable); with 900KV motors and 1245 props. You are going to need more battery for a decent flight time. I recommend...

Looks good but I would recommend using "FPVMODEL MC4108 475KV Brushless Motor for multirotor" https://www.fpvmodel.com/print_page_p816.html And those ESCs you ordered are to be (ideally) used for Fixed Wings.

Without someone sitting in... DEFINITELY.

Well from what I have observed, you don't need to be in the DFU mode to flash the firmware, if you have CF of BF on it you can just flash it with an FTDI adapter connected to the MainPort and enabling the main port.(It has worked for me all along). I don't think that it is booting up at all...

Hi, I have a non-working OpenPilot CC3D and I think I messed it up myself. I want to get to the depth of the problem and solve it. I do have a Brain, a Seppuku (dronin) and a couple of Naze32 REV6 Full version boards around but they are all in use. The point is I had installed BetaFlight on it...

I have worked on some pretty hi-power projects (like 3-4 6S batteries, enough to lift a kid) the best way to fix this cheaply and reliably is to re-wire the cells (in the battery) and use direct connections between parallel cells and ESC(s). Using completely different batteries is also helpful...

Hi, I was flying a ZMR250 quad yesterday. I gave it a plenty of height, like ~200ft or so then a bird came out of nowhere and crashed into the quad. The bird (a sparrow) was cut into pieces(still feeling bad about it). And I was sure that my quad will soon be in pieces too but it wasn't in...

Hi guys, I just finished my ZMR250 build wiith naze rev 6 emax simonk 12a esc emax 2204 2300kv motors and DAL 6045 bullnose pprops. There is a problem i ordered the wrong battery, a 3300mah 35c 11.1v 3s lipo its 270 grams in weight i dont intend to use a camera or any other equipment so will it...