Search results

Thank you guys. I narrowed it down to Run Cam Split mainly due its size & price. One bird. Two shots ;) Has both HD recording capability and FPV built in a tiny camera

Hi Guys, I'm looking for a HD recording camera for under $50 to fit onto my quad. I've tried many resources online but most of them keep talking about FPV. Any recommendations for HD Cam ?

Thanks @mozquito1 . You were of great help :)

What camera did you use for the shoot @Moundman16 Thanks

yep. I think you are right. I did flash an old version of cleanflight and accessed the BLHeli Suite. All the 3 Opto ESC's were detected (Turnigy MultiStar 30A BLHeli-S Rev16 V3 ESC 2~4S (Opto) except this unique one (TURNIGY Plush 10amp Speed Controller w/BEC). So this ESC spins a little out of...

I figured out what I was doing wrong. I changed my motor protocol to PMW (previously it was oneshot125) and everything works now. The only issue is that the left top motor spins out of sync (It starts spinning at 1190 throttle) whereas the other 3 motors start at min throttle. I think the...

Yep, I did switch my ESC's & Motors around. Figured it wasn't neither the ESC nor the Motor. So, earlier I've been controlling my RX in PPM Mode (as you can see in the above picture). Yesterday, I changed to PWM Mode & plugged in the ESC directly to Channel 4. Now, My ESC with BEC was able to...

Thank you for your response. I kind of did some research yesterday on why it wont work. This ESC needs to be programmed (comes with Linear BEC). When I turn my ESC on I hear Beep Beep every 2 seconds continously. I've tried all things suggested online about moving the throttle stick up and...

Hello, This is my first quad build and I've been trying various things to get my quad running. However, this is one thing I can't figure out. I have 3 motors powered via 10A ESC (Left Botton, Top Right, Botton Right). I have 1 motor powered via 10A ESC with BEC (Top Left). Yesterday, I...

Thanks for the chart. I've found a one posted elsewhere and was a little off. BTW I've a 3S battery. So I'll go with assumption of peak current of 10+ per motor at 100% throttle. I'm hoping my 10A ESC's should be able to handle the load momentarily.

I haven't tested it yet. Just trying to get an idea on what I can expect. I think I do not have the correct battery for my purpose.

Hi Everyone, I am working on my first quad build. I'll need help with understanding a little into my quad amp requirements and supply with the following parts. Power Supply: Turnigy LiPo Battery: 2200mAh (45C-90C) Assumption: 2.2*45 = 99 Amps Max Draw Power Demand: 4 Arris MT1806-2300kV DC...