Search results

The TX shows a signal of 10 when I plug the battery pack into the quad.

I've already set up the TX to be on PPM and iBus.

The receiver has always showed one red led. The other led for the RX is an update led. The FC shows a constant red led and a flashing green led.

Okay so unplugged everything except the red/black/white and plugged it into the last slot on the receiver. The LibrePilot still shows no activity.

Okay so the receiver has 5 single wires. Channels 1-5 and one plug with 3 wires a red, black and white.

Also the CC3D still shows a blinking status green light.

Alright so on LibrePilot it still shows no activity from the receiver.

Okay so the info about the transmitter I did not know. I've set the transmitter up for PPM. Now im going to attempt the computer set up again. Fingers crossed. I also rechecked the wiring and it is correct.

Here is another picture.

Not sure if this is going to help or not.

When I set up the quad on LibrePilot I set it up for PPM. I'm about to replace the CC3D and see if something is wrong with that unit. This was supposed to be an ARF unit, but it is getting to be more of a pain in the ass than anything! I just want to get it up in the air!

I have that solid red light, but the green light next to it on the receiver flashes. Also the Libre pilot shows that it is not receiving any activity from the transmitter.

I'm using a fs-ia6b receiver.

A couple of times. The receiver green light continues to flash though. Any ideas? It did the same thing with both transmitters and multiple receivers attempts.

Okay so I'm new both here and to quads. I've got a DYS 250 and I've tried both Flysky FS-TH9X and a FS-I6X transmitters and whenever I attempt to use the LibrePilot GCS to set the quad up I get the message "No Actuvity" in Receiver Activity. I've tried different receivers and obviously I've...