Don F. Moss
New Member
I have sort of inherited an XAircraft X600D Quad. I am having trouble getting it up and running.
My setup is the kit componets, so far. The ESCs are all on one board. The FC must be calibrated through a PC link. I am using a Spektrum DX8 Tx/Rx.
I keep getting the beeper error indicating the throttle is not at it's lowest setting. It is. Any notion what could be causing this problem?
One thing I have considered is replacing the ESC board with 4 individual ESCs and replacing the FC with a KK or similar board. I have no specs on the motors, however. The only markings on the motors are C2809-S. Anyone have any idea of the needed ESC for these motors?
Thanks,
Don
My setup is the kit componets, so far. The ESCs are all on one board. The FC must be calibrated through a PC link. I am using a Spektrum DX8 Tx/Rx.
I keep getting the beeper error indicating the throttle is not at it's lowest setting. It is. Any notion what could be causing this problem?
One thing I have considered is replacing the ESC board with 4 individual ESCs and replacing the FC with a KK or similar board. I have no specs on the motors, however. The only markings on the motors are C2809-S. Anyone have any idea of the needed ESC for these motors?
Thanks,
Don