Which GPS module?

[Quadcopter102]

I have two 450 frames.
I have two FC CC3d Revo and Naze32 10dof. Both capable of GPS modules... ( seems to be only the wire connectors that differ)
I propose to use the CC3D revo first.

Has anybody used the Revo with a GPS module and or which - apart from the expensive stuff - give decent results without needing a degree in Physics to programme in??

Any advice hints and tips - gratefully accepeted

 

[RENOV8R]

Have you considered a ZYX-M flight controller? For around a hundred bucks you get GPS and very good FC. Very simple to set up and lots of features that probably wouldn'y get with a Naze module.
http://www.hobbyking.com/hobbyking/...X_M_Multirotor_GPS_Flight_Control_System.html

 

[Quadcopter102]

Have you considered a ZYX-M flight controller? For around a hundred bucks you get GPS and very good FC. Very simple to set up and lots of features that probably wouldn'y get with a Naze module.
http://www.hobbyking.com/hobbyking/...X_M_Multirotor_GPS_Flight_Control_System.html

Thanks for this info... checking it now.


Edit:
Back...found it costs au$155 for the kit. Seems OK - but typical HK...not in the aussie store - which means at least another au$20 in shipping costs.
The only plus is the usual pop up "discount" puts it at au$136 and then shipping again.
I thinks its something to consider..after /if - I can sell off a couple of 500 frames I built and never used after testing then...much prefer the 450 size frames - for now.

Thanks again