Various, motors, ESCs, flight controllers - enough to build at least 4 - 450/500 frame size quads

[Quadcopter102]

During building and trying stuff, delays with eBay shipping to me and pushing me to HobbyKing and other faster - but more expensive shipping online stores - I have accumulated a lot of stuff I am not using or needing. after settling on 1 450 and 1 500 alien frame I am rebuilding and taking them both to GPS.
So I figure if I can sell on some of the collection of various quad building parts - I can put $$$$ towards a top range radio.

I also have three radios, a channel Turnigy and RX which is a really good "starter".
It has a 50% power switch which and a switch on channel 5.

My Devo 10, - which proved never to have any faults, only an idiot buyer who never trusted EverBuying after the Syma Saga. 1 White RX1002 9chnl RX and a RX601 6chnl.

I also have a Phantom 3 Professional - about 3/4 months warranty left. The camera still has the protective vinyl on. Its never been above garden fence level - because we have a really miserable s**t behind us who would complain to CASA, cops and his State senator if he thought it would cause me hassle! Interested - PM me.

None of my stuff has been crashed or damages. I test in the garden and do not believe in cutting th e grass too often... even an heavy plop landing is cushioned!

If anybody else is interested PM me with what you are looking for.
BUT...no PayPal!
Still waiting 3 years later to get a camera back after a PayPal refund

I would prefer for folk to visit, inspect and buy - but unless you are within 100klm of Sydney - its not likely to happen!

If you want anything shipping - you decide how and the cost + insurance etc,.

 

[ruzzmasta]

Would you accept any trades or just strictly cash? I'm looking to get into the sport and you have a good amount of stuff. Is there anything we can work out?

 

[Quadcopter102]

Would you accept any trades or just strictly cash? I'm looking to get into the sport and you have a good amount of stuff. Is there anything we can work out?

Hi,
Sorry for not replying sooner... did not get any notification by email and have been doing some building work for my daughter and SIL at their place - so not had time to get the toys out!
However - I was looking for cash. Basically I have a PhantomP3, two batteries all the standard in the box stuff and a hardshell case - not DJI and was hoping to shift most of my stuff and get either an Inspire or more likely now - the new P4 which in Aussie is sold at au$2400 - then an extra battery -spare props and better case will up the bill to around au$3000 .

Also if you are not within a reasonable driving distance - I am 100klm north of Sydney trades can be a problem.

I have.
2 of 500 Alien Frame 2212 - 920 motors - Emax 30a ESC - with KK2 or CC3D FC

1 Turnigy 5 Chanel radio and RX ( 1 model only) basic starter radio but very good to learn on...also has a 50% / 100% power switch handy for beginners to use 50% till they get familiar.

1 Devo 10 9 channel radio stores 30 models 1 RX1002 1 RX601 and a lipo battery

1 Flouron 4500 mAh lipo 30c 3 cell

1 Turnigy 2.2 mAh lipo 25-35c 3 cell

1 B3 iMax charger ( I have two actually but need one to charge the Devo lipo - unless it sells)

These are all "excess stock" My main toys are a couple of 450 frames with DJI 2212 92o motors - 30am Emax ESC with CC3D Revo and Naze32 10dof ( GPS and compass facilities) and I have a Turnigy i10 radios and 3 RX to play with - BUT for the right money they can all go! Then the Inpsire is more likely!

Looking to get into the sport?? The above frames builds tend to be stronger build than the thin plastic bodies on store purchased RTF stuff - BUT you would need to learn about the electronics more and be able to adjust the flight controllers. Buying a low priced RTF and learning on that will not harm your progress.... its what most of us starting out did/do. The holder hands have mainly come in from Airplanes and helicopters... so have mostly mastered all the technical stuff. Which is why this forum as some real smart guys to help out us newbies!

Hope you soon get into flying and have fun...