Tenergy TB6AC+80W battery charger

S

Steve95

Active Member
I have the above charger. I just got a Syma X8C drone with a 7.4V 2000 mAh li-ion battery.

https://www.amazon.com/Tenergy-Inte...sr=1-1&keywords=tenergy+tb6ac+battery+charger

https://www.amazon.com/Tenergy-2200...2772846&sr=1-5&keywords=battery+for+X8c+drone

I need an adapter cord to charge the battery. The charger that came with the drone uses the "Syma type" connector to charge it. I need an adapter with the "Syma style" connector to banana plugs.

If I want to balance charge the battery the charger has a spot on the balance port for the "Syma type" connector, but would need an adapter to go from the banana plug ports on the charger to the red, round connector on the battery. Does any one know what the red round connector on the batteries that the X8C uses is called and where I could get one?

Thanks in advance for any help.....................................
 
I just use the aligator clips supplied with my charger to charge my syma battery, just have to be careful and don't do this if you are not available to keep an eye on it while chargeing and be very carefull to observe correct polarity, black to black red to red
 
Hi mate on the pack of wires that came with the charger there is 2 wires with no plug on just fit the 3,5 HXT to that wire the less connectors the better in the line your charging on hobby king does the 3.5 HXT
 
I'm waiting to get the adapter & then I'll decide whether I splice it in or use the connectors. Thanks.....................
 
You must log in or register to reply here.
Back
Top