I just switched to Taranis x9d plus and I put a rxsr on my chameleon. I jumped the 5v jumper and wired the rxsr on the same uart my lemonrx was on. I set up the model in my taranis and changed the tab in configurator to sbus, I also still have the serial rx on uart 2. I changed the channel map to taer1234. I put the taranis into bind mode and powered on the quad with the bind button held down and the red light started blinking after a few seconds I unplugged the quad and took the tx out of bind mode, turned of tx and back on then powered quad on and I got a solid green and blue light like the manual says I should have. But I don' get any response in Betaflight. Sometimes the taranis keeps saying telemetry lost then found then lost sometimes it doesn' say that. But it does say it when I unplug the quad from BF. I' new to frsky and I don' know what I'm doing wrong. Any help would be greatly appreciated.
