Hello, I recently replaced a X8G with a X8HG and it is pretty much the same copter with the exception of the X8HG having altitude holder.
Anyway, my controller has two thing going on.
First, the Tx signal was flashing so I fixed that by pressing up on the right trim button when powering the controller on. Now, it is steady.
Second, the controller appears to bind with the quad but the quadcopter symbol is flashing and the controller starts with the speed indicators (the one that goes up or down when you move the left stick up or down) at halfway and the copter doesn't start. The left stick doesn't disengage like the X8G did with speed starting at zero pre-flight. It sort of stays in the middle with the speed indicator halfway and as mentioned, the quad symbol is blinking.
This doesn't appear to be normal. Thanks in advance for your assistance.
Anyway, my controller has two thing going on.
First, the Tx signal was flashing so I fixed that by pressing up on the right trim button when powering the controller on. Now, it is steady.
Second, the controller appears to bind with the quad but the quadcopter symbol is flashing and the controller starts with the speed indicators (the one that goes up or down when you move the left stick up or down) at halfway and the copter doesn't start. The left stick doesn't disengage like the X8G did with speed starting at zero pre-flight. It sort of stays in the middle with the speed indicator halfway and as mentioned, the quad symbol is blinking.
This doesn't appear to be normal. Thanks in advance for your assistance.