Part list opinions and recommendations

[Erik]

Hey!



I´m building my first quadcopter and want your opinion on some parts that I´m planning to buy. I would like to now they are compatible with eachother and if you think that they are the best buy.

Thank you



450 frame with interated pcb (already buoght)

http://i00.i.aliimg.com/wsphoto/v1/...rame-Blue-White-High-Landing-Gear-for-DJI.jpg (as shown on this image)



MultiWii PRO fligth controller

http://www.hobbyking.com/hobbyking/...i_PRO_Flight_Controller_w_MTK_GPS_Module.html



2-axis gimball controller

http://www.hobbyking.com/hobbyking/...Gimbal_Stabilization_Control_Board_w_IMU.html



FrSky Taranis 9XD Plus

http://www.hobbyking.com/hobbyking/...o_Digital_Telemetry_Radio_System_Mode_2_.html



Gimball for GoPro (already bought)

http://www.hobbyking.com/hobbyking/...h_2208_Motors_and_3K_Carbon_Construction.html





20Amp afro ESC (already bought)

http://www.hobbyking.com/hobbyking/..._Motor_Speed_Controller_SimonK_Firmware_.html



Multistar Motor and props (already bought)

http://www.hobbyking.com/hobbyking/..._Motor_and_Propeller_Combo_10_4_5_CW_CCW.html



Zippy 3cell 4000mAh battery (already bought)

http://www.hobbyking.com/hobbyking/store/__9957__ZIPPY_Flightmax_4000mAh_3S1P_40C.html



Turnigy 12v 2-3 cell charger (already bought)

http://www.hobbyking.com/hobbyking/store/__7637__Turnigy_12v_2_3S_Basic_Balance_Charger.html

 

[holtneil]

Hi mate it hard to help when you already have most ok you dont need gimbal control as the FCB will do this for you any way output pin 13/14
Multistar motors work better with a ESC with BL heli flash , but may be ok with the simonk if the motors throttle keep pitching your have to change the ESC to BL heli flash
The rest should be spot on

 

[Erik]

Hi again and thanks for your feedback

If I want to use telemetry then what do I need, is it this hub and these sensors.

http://www.hobbyking.com/hobbyking/store/__19970__FrSky_FSH_01_Telemetry_Sensor_Hub.html

http://www.hobbyking.com/hobbyking/...y_Voltage_Sensor_FrSky_Telemetry_System_.html

 

[holtneil]

Hi mate yes your need the hub and sensors for what info you want sent back

 

[GJH105775]

Looks great, you really did some research before posting. Were you in to hobby stuff before you got into muti-copters?