satan6907
New Member
Hey, new to real rc quads, have 2 cheap minis. Bought a 250 fpv race quad on impulse for $50. Figured it would be away to get my feet wet before i build a 3d printed 450.
Well broughtt it home and talked to a few locals about a radio and ended up getting a spektrum dx6. The wiring on the quad was a huge mess and I didn't have a use for the FPV stuff so tore it all down.
I verified all the escs and motors work, escs being afroman 12a bec models. The flight controller is a http://www.hobbyking.com/hobbyking/...er_w_FTDI_ATmega_2560_V2_0_US_Warehouse_.html. Also have the Hb-02 bluetooth modual for it and a NEO7 gps.
the issue I am having is when I hook up all the escs and all the connections to the radio, the escs arm but no response from the radio and the B led just flashes.
Well broughtt it home and talked to a few locals about a radio and ended up getting a spektrum dx6. The wiring on the quad was a huge mess and I didn't have a use for the FPV stuff so tore it all down.
I verified all the escs and motors work, escs being afroman 12a bec models. The flight controller is a http://www.hobbyking.com/hobbyking/...er_w_FTDI_ATmega_2560_V2_0_US_Warehouse_.html. Also have the Hb-02 bluetooth modual for it and a NEO7 gps.
the issue I am having is when I hook up all the escs and all the connections to the radio, the escs arm but no response from the radio and the B led just flashes.