hi need some help

[jerrymacgregor]

I have a ominus q200 got it over the holidays. Did a few small flights but not many. Today being nice out charged it up flew for about 40 secs then I landed it front blade hit the ground as it landed and now the it refuses to move. Did the motor fry that dam quick in it all the other motors running top notch but the front right refuses to move. I have not taken apart yet to see if loose connection. If someone has used this model and has some knowledge to pass on that would be wonderful. The blade and gears seem to be fine they spin and move but nothing from the motor.

 

[ArmyVet]

I know nothing about your quad sorry.

I would take it apart and do a visual check. If your motors are on connectors swap the bad one with the opposite side

Maybe one of the experts will chime in.


Good luck

 

[GJH105775]

I have a ominus q200 got it over the holidays. Did a few small flights but not many. Today being nice out charged it up flew for about 40 secs then I landed it front blade hit the ground as it landed and now the it refuses to move. Did the motor fry that dam quick in it all the other motors running top notch but the front right refuses to move. I have not taken apart yet to see if loose connection. If someone has used this model and has some knowledge to pass on that would be wonderful. The blade and gears seem to be fine they spin and move but nothing from the motor.

Broken electrical joint, maybe burnt motor, or if the motor is hard to spin by hand sounds like a bent shaft.