got my gogs!!

[Zentg]

at first i was like:

then i was like:

never seen such beautiful static, can't wait til my falcon gets here!!

i need to get some glue to glue on the foam strips for comfort - should i just use regular elmers glue or what can i get from walmart?


my rc832 outputs from the bottom so its too short to reach the battery so im basically going to just ducktape the receiver to the top of the goggles and use a right angle antenna to stick up xD

i like to do things the simplest way possible, cus im most likely to F it up otherwise, so i think instead of gluing on the strips, im gonna get some 3m foam that has a strip on tape so i can just put that on the goggles.

otherwise i think the weather sealing strip on stuff should work good, they are kinda leathery comfy lol

 

[RENOV8R]

at first i was like:

then i was like:

never seen such beautiful static, can't wait til my falcon gets here!!

i need to get some glue to glue on the foam strips for comfort - should i just use regular elmers glue or what can i get from walmart?


my rc832 outputs from the bottom so its too short to reach the battery so im basically going to just ducktape the receiver to the top of the goggles and use a right angle antenna to stick up xD

i like to do things the simplest way possible, cus im most likely to F it up otherwise, so i think instead of gluing on the strips, im gonna get some 3m foam that has a strip on tape so i can just put that on the goggles.

otherwise i think the weather sealing strip on stuff should work good, they are kinda leathery comfy lol

Just make sure you check if the antenna output on your receiver is SMA or RP SMA so you get the correct antenna

 

[Zentg]

Just make sure you check if the antenna output on your receiver is SMA or RP SMA so you get the correct antenna

yeah i know, for my first flight on tuesday i am going to just use the stock antennas (not planning to go very far or high)

I hear the stock antenna that comes with the falcon is a pretty decent mushroom/clover antenna, so probably gonna just replace the wifi router antenna on my rc832 with a nice clover antenna (i need RP SMA male)

and later if i want to check out the life of dual diversity, i will get a dual diversity receiver and then use the clover antenna and a flat panel antenna

 

[Altsickeness]

at first i was like:

then i was like:

never seen such beautiful static, can't wait til my falcon gets here!!

i need to get some glue to glue on the foam strips for comfort - should i just use regular elmers glue or what can i get from walmart?


my rc832 outputs from the bottom so its too short to reach the battery so im basically going to just ducktape the receiver to the top of the goggles and use a right angle antenna to stick up xD

i like to do things the simplest way possible, cus im most likely to F it up otherwise, so i think instead of gluing on the strips, im gonna get some 3m foam that has a strip on tape so i can just put that on the goggles.

otherwise i think the weather sealing strip on stuff should work good, they are kinda leathery comfy lol

Flip your battery over and stick the wires through the little hole. Stick your receiver in the pocket on the other side, theres holes in the pocket for your battery and monitor plug. It connects together in front of your nose.

Oh and don't use that window stuff. Gets some foam sticky tape.

 

[Altsickeness]

yeah i know, for my first flight on tuesday i am going to just use the stock antennas (not planning to go very far or high)

I hear the stock antenna that comes with the falcon is a pretty decent mushroom/clover antenna, so probably gonna just replace the wifi router antenna on my rc832 with a nice clover antenna (i need RP SMA male)

and later if i want to check out the life of dual diversity, i will get a dual diversity receiver and then use the clover antenna and a flat panel antenna

I've had better luck with a helical antenna and a cloverleaf. The one flat panel I bought was garbage. To be fair there was a review available stating that the one I got was garbage, but I've been real pleased with my helical so I haven't tried anymore flat panels.

 

[Zentg]

Flip your battery over and stick the wires through the little hole. Stick your receiver in the pocket on the other side, theres holes in the pocket for your battery and monitor plug. It connects together in front of your nose.

Oh and don't use that window stuff. Gets some foam sticky tape.

cool thanks for the tip - went to walmart today and couldnt find any foam sticky tape

would this stuff at home depot do the job?

http://www.homedepot.com/p/Frost-Ki...Rubber-Foam-Weatherstrip-Tape-R516H/100090883

for your quanums did u use foam sticky tape? or did u glue on the foam strips that it comes with?

 

[Altsickeness]

cool thanks for the tip - went to walmart today and couldnt find any foam sticky tape

would this stuff at home depot do the job?

http://www.homedepot.com/p/Frost-Ki...Rubber-Foam-Weatherstrip-Tape-R516H/100090883

for your quanums did u use foam sticky tape? or did u glue on the foam strips that it comes with?

First I hot glued the strips that came with it. They kept falling off. Then I used the foam tape like in your HD link. You just might have to experiment to see what sticks and feels comfortable. You can also shave off parts of the mask to custom fit it to your nose/face. Or build up foam tape... Whatever works best for you.