First Quadcopter Setup. Need HELP!

[Adam Knauer]

Hi,
I am new to this and would really love some help. I have been researching non stop recently and have decided that FPV quad copter racing is something I want to start. I have come up with this list of parts and would like to know if they are all compatible. If there is anything you would change. And what FPV system, radio controller, and battery I should get. Finally will this fly well?
Thank you!

1. Frame: 1x Zmr 250 LIGHT Fully Carbon Fiber http://www.readymaderc.com/store/ind...oducts_id=4197

2. Motor: 4x Sunnysky X2204S 2300KV – CW
http://www.readymaderc.com/store/ind...oducts_id=3902

3. Esc: 4x T-Motor ESC - SimonK 12A 2-4s, 1A BEC
http://www.readymaderc.com/store/ind...oducts_id=2580

4. Props: 4x Direct Drive HQ Prop - Carbon Composite - 6x3
http://www.readymaderc.com/store/index.php?
main_page=product_info&products_id=2598

5. Distribution Board: 1x Abusemark - Mini Power Distribution Board
http://www.readymaderc.com/store/ind...oducts_id=3287

6. LED lights: 1x Flexible RED LED Strip with Adhesive Back 1m Section
http://www.readymaderc.com/store/ind...roducts_id=767

7. Camera (Recording Only): 1x Mobius Action Camera - 1080P HD
http://www.getfpv.com/mobius-action-...-1080p-hd.html

8. Flight Controller: 1x Pre-Soldered Naze32 Acro
http://www.miniquadbros.com/products/acro-naze32

9. FPV Setup: ?????????

10. Radio Controller: ?????????

11. 3s Battery: ??????????

 

[GJH105775]

Battery, this one has 45amp constant discharge rate, I suggest getting a couple of these smaller ones as apposed to one bigger capacity battery.
Radio, I suggest getting the Spektrum DX7, if you want to stick with getfpv.com and have the money, if not Isuggest the Turnigy 9X from hobbyking.com

Check out this thread I did for my suggestion of an FPV setup.

I suggest you get different motors, as these won't handle a 3S battery.

The Mobius is great, but you may want to check out the Runcam.

Also for a racer you may want some 4.7 pitch props, as they are faster, unless you are just learning to fl

 

[Adam Knauer]

Thank you for the response! I did not know those couldn't support a 3s battery I will have to reconsider.
Would you suggest 5030s or 6030 props?
And 2 blade or 3 blade?

 

[GJH105775]

Thank you for the response! I did not know those couldn't support a 3s battery I will have to reconsider.
Would you suggest 5030s or 6030 props?
And 2 blade or 3 blade?

I'd go with 3 blade, as for props it kinda depends how you want to fly.