I have a HGLRC draknight 2 that I was trying to tune in the field with my phone using an otg cable and got it to connect initially but after a few seconds it disconnected. I tried to reconnect the cables and tried with and without battery connected bout wouldn't connect.
Then i noticed the TX wasn't connecting and the rx light wasn't flashing. The red status light comes on steady for a few seconds then flashes 3 times then goes steady. The green one stay off for few seconds then flashes twice pauses then flashes 3 times and repeats. And blue does a long flash followed by 4 flashes pause then 5 flashes and repeats. I also get 2 beeps after the startup tone from escs but windows no longer detects it even in device manager.
Kinda seems like I bricked it but not sure how to reflash if so? Considering it won't even detect it in windows. Thanks for your help!
Then i noticed the TX wasn't connecting and the rx light wasn't flashing. The red status light comes on steady for a few seconds then flashes 3 times then goes steady. The green one stay off for few seconds then flashes twice pauses then flashes 3 times and repeats. And blue does a long flash followed by 4 flashes pause then 5 flashes and repeats. I also get 2 beeps after the startup tone from escs but windows no longer detects it even in device manager.
Kinda seems like I bricked it but not sure how to reflash if so? Considering it won't even detect it in windows. Thanks for your help!