Check my parts list please?

[Proudtex76]

I am about to place an order with HobbyKing.com and would appreciate a second set of eyes. Have I left anything off. This is my first build and I need to make sure I don't get halfway in and need to order something or ordered the wrong size motor or ESC. Thank you in advance!

Quantity Stock Product description
1-366000005-0 - Q450 V3 Glass Fiber Quadcopter Frame 450..
4-9192000131-0 - Afro ESC 20Amp Multi-rotor Motor Speed C..
4-9192000200-0 - Turnigy Multistar 2213-980Kv 14 Pole Mul..
2-505000063-0 - Multirotor Carbon Fiber T-Style Propelle..
2-505000061-0 - Multirotor Carbon Fiber T-Style Propelle..
1-9387000080-0 - HKPilot32 Autonomous Vehicle 32Bit Contr..
1-9171000243 - Afro ESC USB Programming Tool
1-T2200.3S.25 - Turnigy 2200mAh 3S 25C Lipo Pack
1-Turnigy-HKLP - Turnigy Battery Strap 330mm
1-9070000040-3 - Turnigy P405 Dual Input (AC/DC) 45W Digi..
1-TX-9X-M2 - Turnigy 9X 9Ch Transmitter w/ Module & 8..

 

[ringolong]

I don't know much about the flight controller, but the rest of it looks fine. Here is a rough draft from ecalc. I would recommend going with some cheaper props to learn on if this is your first multi.(get several if this is the case)

Some accessories you may think about are bullet connectors if you decide to go this route, heat shrink, xt60 connectors, solder gun, solder, flux, zip ties.

 

[GJH105775]

Battery is a bit too small, props should be fine, if they make the motor run warm you can change them. Are you sure you want that flight controller? A multiwii will do about all the same stuff and will have more help if you run into a snag. For example your Radio needs to be PPM to work with the flight controller.

I'd suggest this battery.