So i am new to building these things and i want to try a build with a HobbyKing FPV250 quad copter frame using these parts available through hobbyking.com and i would like to hear your thoughts on it.Multistar V2 2206-2150KV Motor The "Baby Beast" (V2) (x4),Favourite Sky 3 Quattro 4 x 12A Brushless Quadcopter ESC 2-4S 1A BEC BLHeli,MultiStar High Capacity 3S 3000mAh Multi-Rotor Lipo Pack,HobbyKing™* KK-Mini Multi-Rotor Flight Control Board 36x36mm (30.5x30.5mm) ,Gemfan Glow In The Dark 5030x3 Propeller set CW/CCW Multirotor 2/PC per bag 5x3x3,Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2),FPV Fiberglass Pan-Tilt Camera Mount L-Size,FPV Transmitter & 1/3-inch CCD camera PAL,Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo (x2),LawMate RX-2460 2.4GHz 8Ch Wireless A/V Receiver, and a Quanum DIY FPV Goggle Set with Monitor (KIT). if i calculated right it will end up being around 583 grams. also i feel like there should be a bit more to it than this so if there are any parts that i am missing please let me know!!!
Building an fpv250 quadcopter...... need advice
- Thread starter danno92
- Start date
alright so after looking around a bit i realized my post is a bit confusing because it is all mashed together so here it is broken out better
frame- HobbyKing FPV250 quad copter frame $9.99 weighs 110 grams
motors-Multistar V2 2206-2150KV Motor The "Baby Beast" (V2) $14.99 each weigh 30 grams a piece
esc-Favourite Sky 3 Quattro 4 x 12A Brushless Quadcopter ESC 2-4S 1A BEC BLHeli $30.02 weighs 58 grams but only 35 grams without top and bottom plates which arent required
battery-MultiStar High Capacity 3S 3000mAh Multi-Rotor Lipo Pack $19.55 weight 195 grams
flight controller-HobbyKing™* KK-Mini Multi-Rotor Flight Control Board 36x36mm (30.5x30.5mm) $19.99 weighs 8.6 grams
props-Gemfan Glow In The Dark 5030x3 Propeller set CW/CCW Multirotor 2/PC per bag 5x3x3 $3.23 for a package of two weight 13 grams?
radio controller-Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2) $25.10 not sure what the reciever weighs
camera mount-FPV Fiberglass Pan-Tilt Camera Mount L-Size $4.99 weight 10 grams
servos-Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo $2.34 each weigh 9 grams a piece
decided to get the camera and goggles all in one instead of separately-Quanum Complete FPV Bundle Set w/ Goggles, 5.8GHz 32ch Video TX & RX, CP Antennas and Camera (PNF) $99.99 not sure what the camera and transmitter weigh
all in all everything costs about $230 and weighs somewhere around 283 grams again please let me know your thoughts and if i am missing anything
frame- HobbyKing FPV250 quad copter frame $9.99 weighs 110 grams
motors-Multistar V2 2206-2150KV Motor The "Baby Beast" (V2) $14.99 each weigh 30 grams a piece
esc-Favourite Sky 3 Quattro 4 x 12A Brushless Quadcopter ESC 2-4S 1A BEC BLHeli $30.02 weighs 58 grams but only 35 grams without top and bottom plates which arent required
battery-MultiStar High Capacity 3S 3000mAh Multi-Rotor Lipo Pack $19.55 weight 195 grams
flight controller-HobbyKing™* KK-Mini Multi-Rotor Flight Control Board 36x36mm (30.5x30.5mm) $19.99 weighs 8.6 grams
props-Gemfan Glow In The Dark 5030x3 Propeller set CW/CCW Multirotor 2/PC per bag 5x3x3 $3.23 for a package of two weight 13 grams?
radio controller-Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2) $25.10 not sure what the reciever weighs
camera mount-FPV Fiberglass Pan-Tilt Camera Mount L-Size $4.99 weight 10 grams
servos-Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo $2.34 each weigh 9 grams a piece
decided to get the camera and goggles all in one instead of separately-Quanum Complete FPV Bundle Set w/ Goggles, 5.8GHz 32ch Video TX & RX, CP Antennas and Camera (PNF) $99.99 not sure what the camera and transmitter weigh
all in all everything costs about $230 and weighs somewhere around 283 grams again please let me know your thoughts and if i am missing anything
