Anyone vape?

[Mike H.]

Just a topic which has improved my health 2 fold.

Ive had and tried just about everything there is and have settle on one particular set up..Simple and cheap.

Two Eleaf 100w mods with either a dripper or one of 2 tanks attached...A Billow V1 or an Orchid V6...Using dual 26g kanthal at .5 ohms with koh gen do cotton and make all my own juice.

I still have a wide variety of tanks and drippers , mech mods, and VW devices.

My start into vaping was a simple kanger evod dual starter kit...Been almost 2yrs now off the nasty sticks.

 

[Mike H.]

Forgot to mention im using Sony VTC4 for my mech mods.. SONY "authentic" VTC5 and Samsung 25R batteries to power my regulated devices and use a Nitecore intellicharger i2 to charge them up with.

Im looking to get a new Xtar or Efest 4 bay charger and some new LG 3000 mah (true 20 amp) cells for my Eleaf device.

 

[Jackson]

Been at it since 11-2009. Those were the days when devices had to made. All that were around were cig-a-likes.

My first mod. Fired with a 14500 using a Joye 510 atty.

Nice step up from Joye's 150mAh battery.

Sony's 18650s have the worst safety record ever. They've had to recall more (10M+), dispose of more tainted, unsafe stock (45M+) than all the top 4 major manufacturers combined.

 

[Mike H.]

Havent heard about the recall...most "accidents" ive heard of were from misuse of them...Typically using too low of an ohm from a coil that draws more amperage than the ratings of the battery or on non regulated devices ,draining the cell down too low.

I build to .45 .50 ohm and, use 20 amp cells which leaves an extremely large safety margin...Even more so with 30 amp cells...I use around 25 26 watts with .5 ohm.

Its those who push the envelope with mech mods that tend to create the negative side with stories of fires and venting batteries...Always an extreme with everything i suppose.

We cant forget false advertisement with battery companies such as efest putting 40 amps on a 20 amp (re-wrapped) cell then the lack of knowledge of the vaper who use them thinking it is safe to use it with a .15 ohm coil on a mech mod.

Assortment of tanks/Rda's..mostly orchid/kayfun hybrids...sold some kept some.

My daily set up (Eleaf 100w and Billow tank)..Also have a Sigelei 30w and a MVP20w as back ups plus 3 tube mech mods and recently sold a home made hammond box with a mosfet.


Currently vaping on some DIY apple cinnamon cookie