Aerial view quad copter build

[Abdulz]

This is going to be my first build , I know how to fly quads but not build them.

Frame - http://www.hobbyking.co.uk/hobbykin...0_Carbon_Fiber_Frame_550mm_UK_Warehouse_.html

Motors -http://www.hobbyking.co.uk/hobbyking/store/__60391__NTM_Prop_Drive_Series_2830_1100KV_Motor_UK_Warehouse_.html


Propellers -http://www.hobbyking.co.uk/hobbyking/store/__57971__Turnigy_8x4_5_Props_For_DJI_and_Walkera_CW_Rotation_White_4pcs_bag_UK_Warehouse_.html and
http://www.hobbyking.co.uk/hobbykin...CW_Rotation_White_4pcs_bag_UK_Warehouse_.html

Is that a good start?

 

[holtneil]

Hi mate I have this frame ,there is not a lot of room to fit parts to, I had to use a base plate from the x525 so I can fit the power board and receiver
Its a nice frame ,I had 1100kv motors to start with the next size up 380w each , had to fit 10x4.7 props to get the lift , I think the props will be to small at 8x4.5
As the quad is now 700mm I run 650kv pan motors ( heavy lift) and 14x5.5 props , I put my watch in so to give an idea of size to the quad