Search results

Changed the plug on the X1 board and put XT60 on it. Charged a 3s 45c 1300 Tatu battery and plugged it in to see what would happen. Quad has super punch and is very fast. Flew it for around 6 minutes very hard. Flew great and when she was done, couldn't get off the ground done, battery was...

Just charged up the original 2s 1300mah and took it for a flight. Flew different than last night, battert I used last night may have been low. You could feel the weight difference and got about 5 min. of flight. Not as much punch as the 3s but was still fun to fly. Handled better than the...

Nothing has any heat except battery after about 3 min. of flight. Has plenty of punch, then starts losing power like it is going into low voltage. Unplug the battery, plug back in rebind then it flies again nut only for a minute then power slowly dies again. I checked voltage in battery and 2...

I checked the Chinese manual, no specs what so ever. I just ordered a 3s 1300mah 45c battery. going to change out the JST connector to XT 60. When it had the plastic body it flew crazy, jittery, lifting turns. Now that it's on the Goby 180, it flies so much different, more control and Rick solid...

I will check but don't think JJRC went into that much detail. The motors are D1806. 2280 KV. ESC'S are incorporated in the board. Will check in a bit to see if the give any specs. The 3s battery is a radio battety with a 15c rating. I put board on a Goby 180 but with 3s, had plenty of punch.

I recently tore the arms off my JJRC X1, cheap body, but brushless. I had a 180mm carbon frame so decided to put everything on the frame. 2s lipo got it off the ground but no punch. I had a 3s 2200 radio battery with a JST plug so decided to give it a try. Plugged it in fired it up, no smoke! My...