Search results

  1. SpaKteL

    my esc connection question

    OPTO esc is with 2 wires. (Yours) BEC is with 3 wires. You can just plug in those 2.(black to (-), white to (S). BEC esc is when you want to power your FC with esc.
  2. SpaKteL

    A question on choosing a flight controller

    Mini apm will be good enough if you want gps and other stuff.
  3. SpaKteL

    Motors

    Yeah, this info helped a lot and that motor gifis awesone. Thanks. Overall this thread was really helpful. Awesome forum!
  4. SpaKteL

    Motors

    Thank you! Then I'll order 4 of these motors right away with 1245 props :).
  5. SpaKteL

    Motors

    Thank you! That explains a lot. So if I'll buy x4 these motors, I could run them CWx2 and CCW x2? Or I have to buy something to do that?
  6. SpaKteL

    Motors

    So I'll have both CW and CCW prop mounts if I'll buy x4 these motors for my quad?
  7. SpaKteL

    Motors

    How can I know if these motors are CW CCW? They are just selling these ones. I am newbie, so this question might seem stupid. http://www.hobbyking.com/hobbyking/store/__66419__Turnigy_Multistar_2834_800Kv_14_Pole_Multi_Rotor_Outrunner_V2.html
  8. SpaKteL

    Is this even possible? Need suggestions on motor etc.

    How large esc you are going to use for 800kv motor?
  9. SpaKteL

    Newbie

    Newbie
  10. SpaKteL

    Power distribution board

    Okey thanks. But now I understood that I can max get 25A for motors, because I have 10000mAh 10C LiPo (100A current from battery /4 = 25A). I guess I will have to buy new 10000mAh 25 C for more current :(.
  11. SpaKteL

    Power distribution board

    Thank you, I'll buy this one.
  12. SpaKteL

    Power distribution board

    http://www.hobbyking.com/hobbyking/store/__66419__Turnigy_Mulmtar_2834_800Kv_14_Pole_Multi_Rotor_Outrunner_V2.html I am using these. Well... is it bad i use only 30A from 40A esc ?
  13. SpaKteL

    Power distribution board

    I need to connect my 4x40A ESCs to my battery for my quad, however I couldn't find any distribution board for that high current (40x4=160A). Maybe I am doing something wrong?
  14. SpaKteL

    1st build (Aerial quadcopter)

    Url link didn't work for previous reply.
  15. SpaKteL

    1st build (Aerial quadcopter)

    Well yeah you are right, but... I wouldn't use 100% of motor power, although i would still get decent amount of thrust and time right? Here is my calculations for 30A ESC and 12 inch prop with multistar 800KV.
  16. SpaKteL

    1st build (Aerial quadcopter)

    I already bought quadcopter frame, so I have to get it done with 4 motors :D. What does it mean under propping it? And what about that max current from Multistars (45A). Do I have to really get 40 A ESC or I can stick with 25A ESC?
  17. SpaKteL

    1st build (Aerial quadcopter)

    By the way you are helping me a lot and I am thankful for that, Anonymous.
  18. SpaKteL

    1st build (Aerial quadcopter)

    Woow thank You!! You solved my bolt hole problem. The multistar motor what you sent it show that it has max current 45A. Is it a problem if I have 25A or 30A ESC? And I have never seen so long case...will 12x4.5 props even work on this monster?.
  19. SpaKteL

    1st build (Aerial quadcopter)

    I understood that those are 35mm motors what I sent. Will they fit on my frame(link in description)? Or i have to find a motor who has 28mm diameter?
  20. SpaKteL

    1st build (Aerial quadcopter)

    Alright, I hope this is not a plane motor :D - http://www.hobbyking.com/hobbyking/store/__67017__Quanum_MT_Series_2814_880KV_Brushless_Multirotor_Motor_Built_by_DYS.html I added my calculations. I understood that 3S batteries are too weak, so I need 4S batteries?
Top