Search results

Jackson, you realized just getting new ESCs doesn't solve the problem right? Do you tell all people with build issues on this forum to just buy a whole new setup too? Not sure I'm going to stick around this forum if this is how you operate.

Getting a new ESC to test, then hopefully getting 3 more :)

PROBLEM NEVER SOLVED, getting new ESCs. I have confused local hobbyshop build experts with this issue and the manufacturer doesn't even know why it doesn't work, but they said not to waste time on it anymore. Thanks for the help.

I went to local hobby shop to consult expert builder, he was surprised to find the FCs were not communicating properly with a basic PWM communication ESC. I was even told by Hyperion tech not to waste my time on this anymore, after about a month of back-and-forth. Not sure why STILL, but my...

Really? I see all over the internet about people using the motors tab to do this? Maybe there's a misunderstanding about what I mean. If you use the motors tab without the battery plugged in (idea is ESCs aren't booted yet), you can get the board to output max pulse width signal, then plug in...

Hello, all. I originally posted with issues on my first build (never flew) and the problem seems to have changed quite a bit...it's an interesting progression if you'd like to follow it, check my other post. BUT the progress has lead to setup changes that would constitute a new posting...

So, I have found that you can adjust the signal interpreted by Cleanflight using the "set rxrange <channel_number> <min> <max>" on the CLI. This helped change my throttle signal through the naze32, as my radio setup is very minimal (cheap) and not adjustable on the front end. Still cannot get...

Update! I got and connected up a naze32 board and patched through with Cleanflight. This allows for more diagnosis insight. Still having trouble getting ESCs to respond to signals through the naze32; same issue as before, different flight control board. Anyone know which protocol a Hyperion...

I managed to get someone from Hyperion to contact me about this...finally they suggested this: "connect only signal wires from the KK2 board to the receiver. Do not power the receiver via the KK2 board output. Powerup the receiver separately with 5V supply i.e with a battery or BEC first. And...

Also, did flash to v 1.17s1 Lite steveis before. Just to review...I can do a throttle-pass through with the KK board, the ESCs respond (beep beep) to full throttle, then respond at no throttle (beep beep). While still in throttle pass through, I can spin the motors up, everything responds...

Never fixed this issue. I moved onto another build, though would love to know why this doesn't work. Any new info out there? I still have the old build, been trying to keep it from collecting dust. I bought the Hyperion stuff thinking it was of great quality...would love to actually use it...

I ruled out it being a faulty FC (flight control) board, as I ordered another one and the same problem persisted. I have been looking into it being something related to power distribution. These ESCs (Electronic Speed Controller) seem to fall into a fail safe mode when they don't get a...

So, I reset the ESCs (all 4) with the programming card they come with. I then reset all of them to values I knew were the same (which were defaults anyway). I re-did the ESC throttle-range setting through the FC board. All went well. I tried to arm very quickly again to keep from too much of a...

Sooty from hobby king forums suggested to reprogram ESCs, said that if all beeping is not synchronized, FC will think they are not programmed. I will try that and post results.

Someone else in the forum also posted this site (maybe you can use this to cross reference the other site to double check): http://multicopter.forestblue.nl/lipo_need_calculator.html

Build1 with Hyperion ESC constnt 2 beep w/ KK 2.1 FCB issue unresolved. But, similar problem in posts. "control-board-not-working-with-esc"

Build1 with Hyperion ESC constant 2 beep through KK 2.1 FCB issue currently unresolved :(

I posted my issue before I read this post. I think I may be having the same issue, but have not concluded the problem. I can run throttle test setting on motor/ESCs from KK 2.1, but when I arm it to fly they beep like yours, but continuously (probably difference in ESC manuf., but similar...

My KK 2.1 board didn't come supplied with an LED either, just the buzzer.

Howdy, I'd like to echo mm's reply. I was using the oddcopter guide at first, but decided to upgrade components. It's one of the best almost full walk-throughs I've seen since doing my research. It's nice because you can mimic the setup and procedures, with great likelihood that it will be a...