Search results

Ok, thanks and with this motor i can use 20C lipo

does 10x4.5 good or really need 10x4.7 ?

what about this motor : http://www.hobbyking.com/hobbyking/store/__52858__NTM_Prop_Drive_Series_28_30_900kv_300W_Brushless_Motor.html i can use 20C and 30A ESC specs : Model: NTM Prop Drive Series 28-30 900kv Kv: 900rpm/v Max current: 18A Max Power: 215W @ 12v (3S) / 300W @ 15v (4S) Shaft: 3mm...

i can't find 35Amp ESC.. I understand what C means so the multistar 5200mah * 20C can give 104A, ok but my motor specs is : Max current: 30A, so 30 * 4 = 120A is that right ?

Battery Load: 23.29 C Voltage: 9.63 V Rated Voltage: 11.10 V Capacity: 5000 mAh Energy: 55.5 Wh Flight Time: 2.6 min Mixed Flight Time: 6.9 min Hover Flight Time: 9.3 min Weight: 405 g 14.3 oz Motor @ Optimum Efficiency Current: 28.90 A Voltage: 9.41 V Revolutions*: 10221 rpm electric Power...

total of 1258,7g

Sorry but what is AUW?

A have some trouble to understand sorry ... Do you say my total weight is too high ?

Wow, so for my setup a 20C is enough ?

Multistar is only 20C i need 30C

I need to change my budget.. I decide to remove FPV part, change flight controller with Naze32, use a 5000Mah 3S, 10x4.7 props, add a battery low voltage alarm.

I see i can't use 4S because FPV kit doesn't allow 4S voltage, i need to use 3S.

What do you think about this model for ESC (some friends say AFRO is good) : http://www.hobbyking.com/hobbyking/store/__57957__Afro_ESC_30Amp_Multi_rotor_Motor_Speed_Controller_SimonK_Firmware_UK_Warehouse_.html?strSearch=AFRO the proflight are very expensive... Ok for the props, thank you!

Hello, First, sorry for my bad english I'm French.. I have a SYMA X5C and i want to create a "good" quadcopter to explore outside with FPV transmission and record with a mobius. It's my first setup and i don't know if this is right : ESC...